Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Hyattsville
Chimney liner replacement and partial rebuilds in Hyattsville typically run $2,200-$6,500 depending on flue configuration and masonry condition, and most jobs are completed in a single visit after our Level-2 camera inspection. If your Hyattsville home was built before 1945, there’s a strong chance your chimney was engineered for coal and never properly relined for today’s gas or oil appliances. That’s a safety issue we address with photos you can see and a plain-English verdict before any work begins.
We’ve been dispatching crews to Hyattsville from our Washington, DC office for decades. We know the soft-fired brick of the Historic District, the shared party-wall stacks in the row houses along Baltimore Avenue, and the way Hyattsville’s heavy tree canopy traps moisture against chimney crowns year-round. When you call (301) 479-9806, a live person answers - 24 hours a day, every day - and we’ll schedule your free estimate at a time that works for you.
Why Hearthstone Chimney Co. Is Hyattsville’s Preferred Chimney Liner & Rebuild Company
Homeowners in Hyattsville call us because we’ve been answering the phone with a live person for over 42 years, and we plan to be here thirty more. That changes how you treat a customer. Our Chimney Liner & Rebuild in Hyattsville crews are background-checked, uniformed, and trained to document every inspection with photos and a written verdict you can understand without a engineering degree.
Our 90-Day Done Right Promise is backed in writing with no arguing - if it’s not right, we come back. No paperwork games. We also offer a Free Second Opinion on any written estimate you’ve received, because we’ve seen too many Hyattsville homeowners told they need a full rebuild when a targeted liner replacement would solve the problem safely. Our no-hassle upfront pricing means the number on the estimate is the number on the invoice. And our permanent 5% Senior and Veteran discount applies to every liner and rebuild job we do in Prince George’s County.
Our Chimney Liner & Rebuild Services in Hyattsville
Stainless Steel Liner Installation
A stainless steel liner is the right choice for most Hyattsville chimneys that need a complete, permanent solution. We size and install DuraFlex and Olympia Chimney stainless liners to match your appliance’s BTU output and draft requirements, not whatever pipe fits easiest. In Hyattsville’s Historic District, where party-wall stacks often vent multiple appliances, proper sizing is critical - a liner too large for a modern high-efficiency furnace will never warm up enough to establish proper draft, while a liner too small for a wood-burning fireplace creates a creosote hazard. Our Level-2 inspection determines the exact specification before we order material.

Flexible Liner Installation
Flexible liners solve offset flues and tight clearances that rigid pipe cannot navigate, and they’re often necessary in Hyattsville’s older homes where chimneys were built without the straight runs modern rigid liners require. But flexible liners have been abused in this market. We’ve found them dropped into debris-filled flues, installed over cracked clay tile that should have been removed, and sized by guesswork rather than calculation. We don’t do that. Our flexible liner jobs start with full debris removal, camera verification of a clean flue, and documentation you review before we proceed. We use professional-grade materials from HeatShield and Gelco - no builder-grade substitutes that fail in five years.

Liner Replacement
Liner replacement is our most common job in Hyattsville, and for good reason. The coal-to-gas conversion era left most pre-WWII flues unlined or clad in cracked clay tile never sized for modern appliances. We’ve replaced liners in homes off Farragut Street, in the Queen’s Chapel area, and throughout the neighborhoods near Route 1 where owner-to-rental conversions since the 1970s deferred proper maintenance for decades. Every replacement starts with our camera inspection, includes photo documentation, and ends with a properly sized liner and a new cast crown where the old one has deteriorated. Most liner replacements in Hyattsville are completed in a single day.

Partial Chimney Rebuild
When freeze-thaw damage, spalling brick, or deteriorated mortar joints have compromised the structural integrity of the stack but the foundation and lower courses remain sound, a partial rebuild restores strength without the cost of starting from scratch. Hyattsville’s Mid-Atlantic freeze-thaw zone - winter temperatures cycling repeatedly above and below 32°F - accelerates mortar erosion on the soft, low-fired brick typical of pre-1940 chimneys here. Combined with organic debris and moss from the city’s substantial tree canopy trapping moisture against crowns, partial rebuilds are a frequent necessity. We rebuild with matching brick where possible, tie new work into sound existing masonry, and always install a proper crown with correct overhang and drip edge to protect the repair.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hyattsville
We work exclusively with professional-grade materials from industry-trusted brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. No builder-grade substitutes. We stock common liner diameters and fittings locally, which means faster turnaround for Hyattsville homeowners and no waiting on back-ordered parts for standard jobs. When your chimney needs a liner or rebuild, the material quality matters as much as the installation - a cheap liner that fails in five years costs more than doing it right once.
Common Chimney Liner & Rebuild Problems We See in Hyattsville Homes
- Unlined coal-era flues still venting gas or oil appliances. The flue was never sized or relined for the fuel now burning in it. Draft is wrong, combustion byproducts can seep through soft-fired brick, and carbon monoxide risk is real. We see this constantly in Hyattsville’s pre-1945 housing stock.
- Cracked original clay tiles re-mortared instead of replaced, then a flexible liner dropped on top of debris. This patch-on-patch pattern reflects decades of deferred maintenance, often from owner-to-rental churn since the 1970s. The liner fails prematurely because it was installed over rubble in a flue never properly prepared.
- Cross-contamination between fireplace and furnace flues in shared party-wall stacks. A single stack venting multiple appliances side by side requires careful isolation. Our Level-2 inspection identifies these configurations and tests for leakage between flues before any liner work begins.
- Freeze-thaw mortar erosion and spalling accelerated by trapped moisture. Hyattsville’s tree canopy deposits significant organic debris and moss on chimney crowns, holding water against masonry through freeze-thaw cycles that break down mortar joints and brick faces.
Pricing for Chimney Liner & Rebuild in Hyattsville, MD
Here’s what chimney liner and rebuild work costs in the Hyattsville market:
- Liner Repair (localized patching, HeatShield cerfractory application): $1,800-$2,800
- Flexible Liner Installation: $2,200-$3,800
- Stainless Steel Liner Replacement (single flue, standard height): $2,800-$4,500
- Multi-Flue Stainless Liner (party-wall stack, two appliances): $4,200-$6,200
- Partial Chimney Rebuild (crown to roofline, including liner): $4,500-$6,500
- Full Chimney Rebuild (rare; foundation to cap): $8,500-$14,000
Factors that move the price: flue height, number of appliances served, accessibility for scaffolding, and whether the existing clay tile must be removed rather than bypassed. We do not quote liner or rebuild work without a Level-2 camera inspection - you will see exactly what we see, and nothing is recommended without photo evidence you can evaluate yourself. Estimates are free. Call (301) 479-9806 to schedule.
We Also Serve Cities Near Hyattsville
Our Chimney Liner & Rebuild crews work throughout central Prince George’s County and adjacent Montgomery County, including College Park, Takoma Park, Greenbelt, and Beltsville. Scheduling and dispatch are coordinated from our Washington, DC office, with local crews serving each community.
Serving Hyattsville, MD - Our Local Coverage Area
We’re based in the Hyattsville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Hyattsville
No. A single liner cannot safely vent both a fireplace and a furnace, and in Hyattsville’s party-wall stacks, these flues are often adjacent rather than truly separate. Our Level-2 inspection identifies whether your stack contains two distinct flues or one improperly shared passage. When two appliances are present, we install properly sized, isolated liners for each - typically stainless steel for the fireplace and a correctly sized flexible or rigid liner for the furnace. Call (301) 479-9806 and we’ll camera-inspect to determine your exact configuration.
No. Cracked clay tile is common in Hyattsville’s pre-WWII chimneys, and the right fix depends on the extent of damage, the condition of surrounding masonry, and what the camera shows. Localized cracking may be addressed with cerfractory resurfacing or a properly sized liner that bypasses the tile entirely. We recommend full or partial rebuild only when structural integrity is compromised - spalling brick, deteriorated mortar joints, or a crown that no longer sheds water. You’ll see the camera footage before we recommend anything.
Hyattsville’s substantial tree canopy deposits organic debris on chimney crowns, and that debris traps moisture against masonry through our repeated freeze-thaw cycles. The soft, low-fired brick in pre-1940 Hyattsville chimneys absorbs that moisture, expands when it freezes, and spalls or erodes mortar joints by spring. A proper crown with correct overhang and drip edge, combined with keeping the crown clear of debris, breaks this cycle. We address this on nearly every partial rebuild we do in the Historic District and surrounding blocks.
Third-degree creosote is a hard, glazed, tar-like deposit that forms when wood smoke condenses in a cool flue - common in chimneys never properly sized for the appliance they’re venting. It is highly combustible and reduces flue diameter, making draft worse and fire risk higher. In Hyattsville, we find it coating original clay tile in coal-era flues that were never relined for wood-burning inserts or fireplaces. It must be removed mechanically before any liner is installed; dropping a liner over glazed creosote traps heat and creates a hazard. Our camera inspection identifies it, and we remove it as part of proper preparation.
Every chimney in Hyattsville should receive a Level-2 inspection before any change of appliance, before home sale, and every three to five years for active systems - annually if you burn wood regularly. Even if you never light a fire, your furnace or water heater may vent through that chimney, and an unlined or deteriorated flue venting a gas appliance creates carbon monoxide risk regardless of fireplace use. The pre-WWII construction common in Hyattsville makes this especially relevant. Call (301) 479-9806 to schedule your inspection - estimates are free.
Ready to see what’s actually in your chimney? Call Hearthstone Chimney Co. at (301) 479-9806 for a free Level-2 camera inspection and written estimate. A live person answers 24 hours a day, and we’ll show you photos of your flue before recommending a single item of work. Done right - and we stand behind it.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Hyattsville and surrounding communities since 1984.





Before
After
Before
After
Before
After